Supports-priv-flags: ~]# ethtool -i eno8403 Subsystem: Intel Corporation Ethernet 25G 2P E810-XXV OCPģ1:00.1 Ethernet controller: Intel Corporation Ethernet Controller E810-XXV for SFP (rev 02)ĩ8:00.0 Ethernet controller: Mellanox Technologies MT2892 Family ĩ8:00.1 Ethernet controller: Mellanox Technologies MT2892 Family ī1:00.0 Ethernet controller: Mellanox Technologies MT28800 Family ī1:00.1 Ethernet controller: Mellanox Technologies MT28800 Family # ethtool -i eno8303įirmware-version: FFV21.81.3 bc 5720-v1.39

and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIeģ1:00.0 Ethernet controller: Intel Corporation Ethernet Controller E810-XXV for SFP (rev 02) and subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIeĠ4:00.1 Ethernet controller: Broadcom Inc. I'll leave this open in case someone comes up with something cleaner but what I ended up doing was combining lspci and ethtool: ~]# lspci -v | grep EthernetĠ4:00.0 Ethernet controller: Broadcom Inc.

There's no 'not much shell logic' way of mapping Linux network interfaces to 'device names' (like your 'NIC 1 - Intel x710'), especially in the context of things like multi-port SFP+ cards like the x710 these are designed to offer virtual functions, so the mapping of 'one Linux network device belongs to one hardware device' simply works in neither direction. Link/ether 00:01:02:03:04:05 brd ff:ff:ff:ff:ff:ffĤ: virbr0: mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000 Link/ether aa:aa:bb:bb:cc:dd brd ff:ff:ff:ff:ff:ffģ: enp1s0: mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 Mine looks roughly like 1: lo: mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000

How to get linux mac address